TBC Dry Ice Stripping
C. Giolli, Parma/I, B. Allegrini, Bergamo/I, T. Duda, L. Engl, Baden/CH, A. Giorgetti, A. Groppetti, A. Lanzi, S. Pini, M. Spagnoli and A. Scrivani, Parma/I
ABSTRACT
Thermal barrier coatings have got considerable importance for the improvement of gas turbine efficiency. These materials are applied on the surface of gas turbine blades and vanes and are based on a layer of low-oxidation material (mainly MCrAlY alloys, where M stay of Co, Ni or a combination of both) and a ceramic top layer that acts as proper thermal barrier (normally Yttria Partially Stabilized Zirconia). Coating removal is an important aspect in the production of these blades and vanes. “Decoating” or “stripping” is needed during the production of new components as well as for the reconditioning of existing ones. The present paper is dedicated to a new removal method of the ceramic Zirconia layer, based onby dry ice blasting. This method will not impact on the roughness and morphology of the bond coat surface, making it suitable for re-coating with TBC, without any further operation before TBC recoating. This possibility has an important impact on the stripping costs and time, avoiding all the operations related to the bond coat. The paper presents the process tests to get the process set up and the characterization of the surfaces comparing the stripped ones with the “original ones” coated by LPPS on new components, ready to be TBC coated. Optical and SEM microscopy, 3D profilometry have been used for characterization. Finally a Thermal Cycling Fatigue test has been carried out in order to validate the procedure of stripping and re-coating.
Contact us for further informations about this scientific paper